CNC milling machines

Storma Engraver R3-2212

3-axis CNC single-axis milling machine

This machine offers high-quality components, reliability, ease of operation, and broad functionality at an affordable price, making it an ideal solution for small and medium-sized production.

The sturdy and stable design, free from vibrations and reinforced with a strong profile, enables high-quality milling and engraving tasks on a broad range of materials in both 2D and 3D.

The machine is certified "CE". Warranty 12 months on mechanical components, 6 months on electrical components.

Download catalog

Benefits

Monoblock body and rigid construction. Does not need to be mounted

Multifunctional mobile operator panel for full control

Automatic programming and transfer of CAD files via USB

TEX PowerD high performance CNC module provides 4-axis operation control

Wide range of options for expanding functionality

Processes

ORTHODONGAL CUTS

Hole making

90
CUTS

CURVE CUTS

Block nesting

CIRCULAR CUTS

PROFILING

ELIPTIC CUTS

Edge Profiling

CONTOURING

CALIBRATING

POCKETING

MILLING

ENGRAVING

DRILLING

GROOVING

SHAPING

ORTHODONGAL CUTS

Hole making

90
CUTS

CURVE CUTS

Block nesting

CIRCULAR CUTS

PROFILING

ELIPTIC CUTS

Edge Profiling

CONTOURING

CALIBRATING

POCKETING

MILLING

ENGRAVING

DRILLING

GROOVING

SHAPING

ORTHODONGAL CUTS

Materials

wood

Composite

stone

FINISHED PRODUCTS

funeary art

bas-reliefs

Vanity top

Kitchen top

Control and Software

Hand Type Operator Panel

Digital display to control and positioning of the X,Y,Z axes. Automatic programming. Multi functional ( 15 operator friendly control ) axis joystick / feed-rate / rpm adjusting -Blade current (Ampere) can be seen on mobile operator panel

3-axis CNC control unit TEX

Machine body

Construction

Bridge type machine. Monoblock, rigid (body), non vibrational construction. Heavy and reinforced. No need mounting

Complete Heat treatment and fully bohrwerked chasis :
- Heat treatment has been applied to all steel parts after welding to prevent residual stresses and processed in Bohrwerk.
-- On the machined surface, two sides of linear rails (guides) are mounted

To provide high rust resistance, 2 lines zinc based undercoat and 2 lines acrilic painting.

Fixed Table 2200x1200 mm (Optional up to 4000x12000)

Sliding elements (X,Y,Z)

Bridge cross travel/motion (Y axis ) 1200-4000 mm

The bridge moves 1200 -4000 mm. Linear slides and precision carriages are used and the Upreserved with bellows. A ground helical rack-pinion drive system is used.There is a grease point and internal lubrication in the center. Driven by backlash-free reducers and servomotormovement, adjustable speed control (0÷30 m/min). With the Ammeter control located on the operator panelMovement speed can be adjusted from the digital screen depending on the hardness and thickness of the stone.

Cut head movement (X axis) 2200-12000 mm

Cutting Head travel is 2200 - 12000 mm.on the lineer guides and blocks (up and down of bridge totally 2,2 m x 2 lineer guide and 4 blocks) and and rack and hardened pinions are used and protected with U and I bellows. Cutting Head is thrusted with planet reduction gear (< 5’)- with sevomotor and speed can be adjusted between 0÷30 mt./min from operator panel.

Spindle vertical travel (Z axis) 300 mm

Vertical stroke is 300 mm. Z axiz is thrusted with planet reduction gear (< 5’)- with servomotor and helical screw and nut . Two high strengthed rods and linear guides are used to guidance of Z axis.

Manual Centrilized Lubrication

Spindle Group

Spindel motor AND INVERTER 10 HP 18000 rpm

MOTORIZED WATER VALVE

25 liter / minute water consumption is necessary for cooling of milling tool DN20, 24V DC motorized valve works automatically when milling tool on

Electric Cabinet ( HQ electric / electronic components)

Please note that this page only displays the basic options. Usel Makina offers over 50 options for each machine, enabling you to tailor the ideal machine for your needs. Kindly contact us or submit a request, and our manager will assist you in choosing the most suitable options.

Submit request

TURNING - LATHE

Stone Thickness Measuring System

AUTOMATIC TOOL CHANGER and Spindle (20 tools)

11” Panel CNC Unit

CNC Unit with 11” Display. Automatic programming and transfer of CAD files to the operator panel via USB Multi-functional ( 15 operator friendly controls ) Mobile Operator Panel.

DDX Easystone CAM software Basic

EasySTONE is a powerful, simple and intuitive CAD/automated control system software adapted for STORMA machines and designed for the stone processing industry. Allows you to manage all aspects related to CNC machining.

Learn more

2nd Head of Copy on single Z axis

Automatic lubrication

Aluminum Tray and Vacuum Pads

Milling tools

Saw and Tool Measurement System

Sliding Doors with Safety Switch

Complete Hot Galvanised Coating